Plastic Manufacturing Companies in India: Directory

Projects India currently tracks 261 upcoming plastic and plastic products projects across India, with a combined recorded cost of approximately Rs 61,257 crore. Of these, 176 are verified in our database. The promoters behind them range from large listed polymer manufacturers and packaging film producers to recycling specialists, cooperative federations and mid-sized fabricators — a mix that reflects both the scale and the fragmented nature of India's plastic products industry.

Most Active Plastic Manufacturers and Promoters in India

The table below lists the promoters with the highest number of plastic and plastic products projects in our database, along with the combined recorded cost of those projects. This is not a ranking by revenue or output; it reflects capital deployment in new and expanding manufacturing capacity as tracked by Projects India.

As the chart below shows, the most active promoters vary considerably in their recorded capital outlay — Chiripal Poly Films, for instance, has only two projects on our books but a combined cost of Rs 2,278 crore, while Supreme Industries has four projects at Rs 225 crore, pointing to a portfolio of smaller capacity additions.

Karnataka Co-operative Milk Producers' Federation is a public-sector dairy cooperative, signalling that plastic packaging investment extends well beyond specialist polymer firms into end-use industries that manufacture their own containers and films in-house.

Largest Plastic Plant Projects in India — Upcoming and Under Construction

The projects below represent the highest-value individual investments in India's plastic and plastic products pipeline as tracked by our database. EPC contractors and equipment suppliers should note which stage each project is at, because that determines how far procurement and civil work have progressed.

The dominant product segments visible in this pipeline are PVC and vinyl chloride monomer, polyester and BOPP/BOPET films, PET granules and preforms, and recycled plastics (rPET). Household plastic products and general plastic fabrication — the Hydro S and S Industries project in Pune being one example — represent a smaller share of total capital but a significant share of project count across the 261 projects our database covers. For a full view of all projects in this scope, see our Plastic & Plastic Products projects in India listing.

State-Wise Distribution of Plastic Manufacturing Projects in India

Maharashtra and Gujarat together account for the largest concentrations of plastic and plastic products projects tracked in our database, as the chart below shows. Karnataka, Andhra Pradesh and Odisha form the next tier.

Gujarat's count is heavily influenced by large-value PVC and polyester investments concentrated in Kachchh and the southern industrial corridor around Vapi and Bharuch. Maharashtra's projects are more spread across Mumbai, Pune (Chakan industrial area) and Raigad port zones. Himachal Pradesh and Jammu & Kashmir — which might surprise users searching for plastic manufacturing companies near me in northern India — appear because of packaging film investments in Baddi and Kathua, zones that carry excise and tax incentive histories and relatively low land costs.

In terms of project stage, our database shows 91 projects at Construction Started, 93 Under Approvals and 90 Completed. A further 19 have received approvals and 17 are nearly complete. This spread is useful for procurement planning: projects at the Construction Started or Nearly Completion stage will have active civil, mechanical and utilities procurement open, while those Under Approvals or in Planning are earlier-stage leads. The stage breakdown across all projects — including completed and cancelled — is illustrated below.

For teams covering Andhra Pradesh specifically, our upcoming industrial projects in Andhra Pradesh overview provides additional context on the broader manufacturing pipeline in that state.

How to Approach Plastic Manufacturing Companies in India

Timing and role identification are the two variables that most determine whether a supplier or contractor wins business from an upcoming plant project.

Stage-based timing. Projects at the Planning or Under Approvals stage are too early for formal tendering but are the right moment for introductory meetings, reference submissions and inclusion on vendor shortlists. Once a project receives approvals or moves to Construction Started, civil and structural procurement typically opens first, followed by mechanical equipment, utilities and then process-specific machinery. Projects labelled Nearly Completion are usually past main procurement but may still require commissioning services, consumables and spares.

Who buys what. For a greenfield polymer or PVC plant, the EPC contractor — if one is appointed — will issue most civil, structural steel and utilities tenders. For owner-managed construction (common among mid-sized fabricators), the project engineering or purchase team at the promoter company is the direct buyer. Packaging film plants at scale tend to use specialist turnkey machinery suppliers whose sub-vendors are nominated early. Recycled plastics units, several of which appear in our current pipeline, often procure sorting, washing and pelletising equipment through a narrow set of process integrators.

Segment-specific entry points. For PVC pipe manufacturers and their plant-builders, the upstream raw material plant projects — such as the Mundra Petrochemicals PVC plant in Kachchh or the Veritas India project in Raigarh — represent both direct supply opportunities and signals of where downstream pipe fabrication capacity is likely to expand. For teams targeting recycled plastic products manufacturers in India, the LNJ GREENPET rPET unit in Tonk and the Savita Greentec project in Bharuch (currently on hold) are the two largest current leads in our database. The live government tenders section on Projects India covers public procurement where plastic products are specified as inputs or outputs in infrastructure contracts.

Use our contractor and supplier directory (VendorConnect) to identify EPC firms and fabricators already active in this segment, which can shorten the path to subcontract opportunities on projects where a main contractor is already appointed.

What This Means for Suppliers and Contractors

With Rs 61,257 crore in recorded project costs across 261 upcoming projects, India's plastic and plastic products sector represents a sustained procurement pipeline rather than a single cycle. Several implications stand out for B2B sales and EPC teams.

PVC remains the highest-value subsegment. The Mundra Petrochemicals plant alone accounts for Rs 34,900 crore, and two further PVC plants — from Chemplast Cuddalore Vinyls and Veritas India — add Rs 6,752 crore to the pipeline. Suppliers of chlor-alkali equipment, piping systems, civil contractors with petrochemical plant experience and electrical and instrumentation firms all have clear leads here. Anyone searching for a list of PVC pipe manufacturing companies in India should note that upstream monomer and resin plants create the feedstock that pipe fabricators depend on — tracking these investments reveals where new pipe plant clusters are likely to follow.

Recycled plastics is a growing sub-pipeline. Multiple rPET and plastic recycling projects appear in our records — from LNJ GREENPET in Rajasthan to Ganesha Ecopet in Odisha and Savita Greentec in Gujarat — reflecting regulatory pressure on virgin plastic use and brand-owner demand for recycled content. Equipment suppliers for sorting lines, extrusion systems and quality testing, as well as logistics firms handling post-consumer feedstock, will find this subsegment increasingly active.

Packaging film investment is geographically dispersed. Chiripal Poly Films has projects in both Jammu & Kashmir and Odisha. Sumilon Polyester and Cosmo Films are active in Gujarat. SRF Limited — with three projects and Rs 1,082 crore in recorded cost — spans multiple states. This dispersion means that a supplier relying on proximity to Gujarat or Maharashtra alone will miss a portion of the pipeline.

Recent additions signal continued activity. Three projects were added to our database in the 90 days before this report — Kaka Industries in Kheda (Gujarat), Chemco Plastics in Surat and Savita Greentec in Bharuch — matching the pace of the prior 90-day window. Our Plastic & Plastic Products project tracker is updated continuously, so teams can monitor new entries as they are verified.

For teams also covering adjacent heavy-industry supply chains, our analysis of upcoming aluminium plant projects in India and the list of oil refinery companies and plants in India covers upstream feedstock industries that intersect with polymer and petrochemical plant procurement. A free sample project report is available for teams evaluating whether the Projects India database fits their lead-generation workflow.